Use: Internal reinforcement for bags and leathergoods. Characteristics: Semi-rigid plastic material with high flexibility and thermoforming. It is insensitive to humidity. Retains the characteristics of the buoyancy and flexibility over time. Can be cutted in any direction. The thermo version must be applied with small press at a temperature of 120 ° C and 150 ° C. With a pressure of 4 atmospheres with a pressing time of between 4 and 7 seconds in relation to the thickness and type of leather used. Thickness mm: 0,30 0,33 0,43 0,53 0,70. Packing: 400 sheets in 1 pallet.

Use: Internal reinforcement for bags and leathergoods. Plastic material with good flexibility. It is insensitive to humidity. Retains the characteristics of the buoyancy and flexibility over time. Thickness 0,53 mm. Packing: 400 sheets in 1 pallet.

Use: Suitable for giving buoyancy to leathers. Characteristics: Thermo product with a good adhesion. Packing: 400 sheets on 1 pallet.

Use: Internal reinforcement for handbags and small leather goods. Colours: Clear mixture, Dark mixsture. Characteristics: because of the natural origin of its composition, this product should be stored in locals not too humid.The product should always be coupled between two materials (leayher+leather, leather+fabric …) to avoid possible undulations of the product. Do not expose to direct sunlight because it tends to oxidize as the natural leather. The bonded leather is subject to aging so it should be used within 12 months of its date of manufacture because then begins its slow and natural process of gradation. The product is also available in the type SOFT / SS (rough and polished on both sides) which has a soft hand which makes it suitable for the production of high range of small leather goods, bags and belts. Hightness roll: 150 cm.

Very suitable for the preforming of the upper (boots) Composition: 100% CO. Versions: Thermo without papar Colors:Natural. Weight in gr/m2: 300. Packing: 75 mq per roll.